New guy with old truck

Ask you basic tech questions here.
Post Reply
Posts: 1
Joined: Thu Dec 05, 2019 2:31 pm

New guy with old truck

Post by youngtrucker » Thu Dec 05, 2019 2:32 pm

Alright guys.....I have a 1969 GMC 3/4 ton with a 350 and a granny 4 speed tranny. It is in rough condition and I want to restore her.....where do I start??? All I know is that all of the wiring needs to be redone because the whole cluster panel is out and I have a short somewhere under the hood because I have to disconnect the battery everytime I stop the truck. I need some guidance here and I would appreciate any help anyone could provide on where to order parts or to get a new wiring harness for the whole truck!!!


User avatar
Site Admin
Posts: 33
Joined: Mon Nov 18, 2019 4:29 pm
Location: South Central Nebraska

Re: New guy with old truck

Post by rustybucket » Thu Dec 05, 2019 2:41 pm


There are several places you can get wiring harnesses for Chevys.  Take a look in our Chevy resouces page for some listings ... erlet-gmc/.

If you want to go a inexpensive yet quality route, you can take a look at a universal wiring harness.  Speedway Motors sells a good high quality 12 or 24 circuit harness at a hard to beat price.

Rusty Bucket
I once met an honest fisherman - Ray Harpham, first entry into the Liar's Hall of Fame.

Post Reply